Характеристики продукта
● Низкие вносимые потери
● Компактная конструкция
● Скорость переключения в микросекундах
● Сверхнизкое энергопотребление
Области применения
● Пассивные оптические сети
● Системы оптической защиты
● Измерительные системы
● Мониторинг сетей
Технические характеристики.
| Item | Unit | Parameters | Notes | |
| One-way | two-way | |||
| Wavelength range | nm | 1525 ~ 1565 | ||
| Insertion loss | dB | 1.2 (Typ.); 1.7(Max.) | 1.4 (Typ.); 2.0(Max.) | |
| Polarisation-dependent loss | dB | 0.15 (Typ.); 0.25(Max.) | ||
| RL | dB | ≥40（ Typ.50 ） | ≥35（ Typ.50 ） | |
| Cross-talk | dB | ≥40（ Typ.50 ） | ≥35（ Typ.50 ） | |
| Polarisation mode dispersion | ps | 0.2 | ||
| Repeatability | dB | +/- 0.01 | ||
| Sustainability | cycles | Regular ( >100Billions) ; Ultra-fast ( >1000Billions) | ||
| Switchover speed | μs | Regular (50~200); Ultra-fast (5~10) | ||
| Operating temperature | °C | -5 ~ 70 | ||
| Storage temperature | °C | -40 ~ 85 | ||
| Optical power | mW | 500 | ||
| Dimensions( L ×W × H ) | mm | 44×21×7.5 | ||
Electrical control parameters
| Parameters | Specifications | Unit | |
| Regular | Ultra-fast | ||
| Switching Speed | 50~200 | 5~10 | μs |
| Switching Voltage (VCC) | 2.5( +/-5%) | 5.5~6.5 | V |
| Switching Current | < 100 | < 350 | mA |
| Driving Mode | Voltage or Pulse Driving | Pulse Driving | NA |
| Pulse Width (typical) | 300(Typ.); 500(Max.) | 10 | μs |
| Claim Frequency | <2000 | < 3000 | Hz |
Определение выводов драйвера
односторонний
| Pin No. | Pin1 | Pin2 | Pin3 | Pin4 | Pin5 | Pin6 | Pin7 | Pin8 |
| IN~OUT1 | + | — | + | — | — | + | + | — |
| IN~OUT2 | — | + | — | + | — | + | + | — |
| IN~OUT3 | + | — | — | + | + | — | — | + |
| IN~OUT4 | — | + | + | — | + | — | — | + |
двунаправленный
| Pin No. | Pin1 | Pin2 | Pin3 | Pin4 | Pin5 | Pin6 | Pin7 | Pin8 |
| IN~OUT1 | + | — | + | — | — | + | + | — |
| IN~OUT2 | — | + | — | + | — | + | + | — |
| IN~OUT3 | + | — | — | + | + | — | — | + |
| IN~OUT4 | — | + | + | — | + | — | — | + |
Габаритные размеры(mm)
Информация о заказе FT-98-MOS-1×4ZT-A-B-C-D-E-F
| A | B | C | D | E | F |
| Operating mode | Switchover speed | Operating wavelength | Fibre type | Fibre length | Connector type |
| 1.One-way2. two-way | 1. 50~200us2.5~10us3. Others | 1.CBand1525~1565 nm2. Others | 1.250μm fiber2. 900μm fiber3. Others | 1.0.5 +/- 0.1m2. 1.0 +/- 0.1 m3. Others | 0.No Connector1. FC/UPC2. FC/APC3. SC/UPC4. SC/APC5. LC/PC6. MU/PC7. Others |
Важное уведомление:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they are applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or other. Further details are available from any F-tone Networks sales representative.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers’ eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
