Характеристики
● Низкие вносимые потери
● Широкий диапазон длин волн
● Низкий уровень перекрестных помех
● Высокая стабильность и надежность
● Варианты с фиксацией и без фиксации
● Отсутствие эпоксидной смолы на оптическом пути
Области применения
● Настраиваемые OADM
● Сети городского уровня
● Мониторинг систем
● Научно-исследовательские и опытно-конструкторские работы в лабораториях
D2×2 SM: характеристики
| Parameters | FT-13- D 2×2-S | |
| Wavelength Range | nm | 1260～1650 |
| Operating | nm | 1310/1550 |
| Insertion Loss | dB | Typ:1.0 Max:1.5 |
| Return Loss | dB | ≥50 |
| Crosstalk | dB | ≥55 |
| PDL | dB | ≤0.05 |
| WDL | dB | ≤0.25 |
| TDL | dB | ≤0.3 |
| Repeatability | dB | ≤±0.02 |
| Power supply | v | 3.0 or 5.0 |
| Lifetime | time | ≥107 |
| Switch Time | ms | ≤8 |
| Transmission Power | mw | ≤500 |
| Operating | ℃ | -5～+70 |
| Storage Temperature | ℃ | -40～+85 |
| Relative Humidity | % | 5~95 |
| Weight | g | 16 |
| Dimension | mm | (L)28.5×(W)12.6×(H)8.7((±0.2mm) customization is available. |
Размеры D2x2 SM
Pins
| Control Model | Optical Path | Electric Drive | Status Sensor | ||||||
| D2×2 | Light Pin | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 |
| Latching | P1-P2， P3-P4； P1’-P2’,P3’-P4 | — | — | GND | V+ | Close | Open | Open | Close |
| P1-P4， P3-P2； P1’-P4’,P3’-P2’ | V+ | GND | — | — | Open | Close | Close | Open | |
| Non-latching | P1-P2， P3-P4； P1’-P2’,P3’-P4’ | — | — | — | — | Close | Open | Open | Close |
| P1-P4， P3-P2； P1’-P4’,P3’-P2’ | V+ | — | — | GND | Open | Close | Close | Open | |
Информация для заказа
| Mode | Wavelength | Voltage Type | Control Model | Fiber Type | FiberDiameter | Fiber Length | Connector |
| S=SM M=MM | 85=850nm 13=1310nm 14=1490nm 15=1550nm 62=1625nm 65=1650nm 13/15=1310/1550 nm X=Others | 3=3V 5=5V | L=Latching N=Non-Latching | 5=50/125 6=62.5/125 9=9/125 X=Others | 25=250um 90=900um 20=2.0mm 30=3.0mm X=Others | 1=1m 2=1.5m X=Others | 0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC X=Others |
Примечание: данный продукт доступен в версии с полностью отечественными компонентами.
Данный продукт представляет собой оптический коммутатор серии FT-13; здесь приведены лишь некоторые технические характеристики. При необходимости свяжитесь с нами.
Важное уведомление:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they are applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or other. Further details are available from any F-tone Networks sales representative.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers’ eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
