Особенности
● Превосходные оптические характеристики
● Высокая скорость работы
● Высоконадежный механизм
● Полностью твердотельная конструкция в компактном корпусе
Области применения
● Коммутация оптических сигналов независимо от скорости передачи данных и протокола
● Защита, восстановление и мониторинг производительности сетей
● Измерительная аппаратура
● Регулируемая цифровая групповая задержка
● Медицина, аэрокосмическая отрасль, а также другие производственные и промышленные отрасли
Технические характеристики.
| Attributes1,2 | Performance |
| Wavelength Range3 | 2000nm, or 1550nm, or 1310nm, or 1064nm, or 850nm, or 780nm |
| Insertion Loss | ≤ 1.2 dB |
| Polarization Dependent Loss | < 0.1dB |
| Response Time | < 60 ns |
| Input Power Range | < 500 mW |
| Return Loss | ≥ 45 dB |
| Operating Temperature Range | 0 to 70°C |
| Storage Temperature | -40~+85 |
| Dimensions (Approximate) | 65×8×7.5 mm |
Примечания:
Если не указано иное, все измерения проводились при температуре 25 °C.
Соответствует или превосходит требования стандартов Telcordia GR1221 и GR1209.
Также доступны модели для видимого и среднего инфракрасного диапазонов.
Размеры (мм)
Информация о заказе:FT-98-FOS -1×2-A-B-C-D-E-F
| A | B | C | D | E | F |
| Test Wavelength | Voltage | Fiber Type | Fiber Dimension | Fiber Length | Connector |
| 850: 850nm | 20:180~210V | SM: Single Mode | 025: Φ0.25mm | 05: 0.5m | 00: None |
| 1310: 1310nm | M1:Multi-mode 50/ 125 | 09: Φ0.9mm | 10: 1.0m | FP: FC/UPC | |
| 1550: 1550nm | M2:Multi-mode 62.5/ 125 | X: other | 15: 1.5m | FA: FC/APC | |
| D: 1310/ 1550nm | X: other | X: other | SP: SC/UPC | ||
| X: other | SA: SC/APC | ||||
| LP: LC/UPC | |||||
| LA: LC/APC | |||||
| X: other |
Важное уведомление:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they are applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or other. Further details are available from any F-tone Networks sales representative.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers’ eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
