< img src="https://mc.yandex.ru/watch/105588932" style="position:absolute; left:-9999px;" alt="" />

Модуль MEMS-оптического переключателя 1×256

Характеристики продукта

● Миниатюрный размер

● Высокая скорость переключения

● Низкие вносимые потери и PDL

● Широкий рабочий диапазон длин волн

● Высокая надежность и стабильность

Области применения

● Системы мониторинга сетей

● Системы дистанционного тестирования оптоволоконных линий

● Интеграция модулей и систем

● Измерительная аппаратура

Технические характеристики.

Model numberFT-98-MEMS-1X256
Fibre typeSMMM
Operating wavelength1260~1650nm850±20nmor 1310±20nmor 1400~1700nm
Test wavelength1310/1550nm850/1310/1550nm
Insertion loss 1≤1.0dB( Typical :0.8 )( N≤16 )≤1.8dB( Typical :1.6 )( 16<N≤64 )  ≤2.0dB( Typical :1.8 )( 64<N≤144 ) ≤2.2dB( Typical :2.0 )( 144<N≤256 )≤1.0dB( Typical :0.8 )( N≤8 )≤1.8dB( Typical :1.6 )( 8<N≤64 )  ≤3.2dB( Typical :3.0 )( 64<N≤128 )
Wavelength-dependent loss≤0.3 dB( N≤16 )≤0.4 dB( 16<N≤144 ) ≤0.5 dB( 144<N≤256 )≤0.3 dB( N≤8 )≤0.4 dB( 8<N≤64 )  ≤0.6 dB( 64<N≤128 )
Polarisation-dependent loss≤0.15dB≤0.2dB
Return loss≥45 dB≥30 dB
crosstalk≥50 dB≥30 dB
Repeatability≤±0.05dB≤±0.05dB
Switchover time≤15ms
Number of switches≥109 次
Input optical power≤500 mW
Operating voltage/currentDC5V±10%≤50mA( N≤16 )≤250mA( 16<N≤64 )≤350mA( 64<N≤144 )≤500mA( 144<N≤256 )DC5V±10%≤50mA( N≤8 )≤250mA( 8<N≤32 )≤450mA( 32<N≤96 )≤550mA( 96<N≤128 )
Operating temperature-5 ~ 70 °C
Storage temperature-40 ~ 85 °C
Module dimensionsM1 :34(L) x24(W) x 11(H) ±0.2mm ( N≤16 ,Bare Fiber)M2 :60(L) x24(W) x 11(H) ±0.2mm ( N≤16 ,Loose Tube )M3 :90(L) x 55(W) x 12(H) ±0.2mm ( 16<N≤64 ,Loose Tube )M4 :100(L) x 100(W) x 12(H) ±0.2nm( 64 <N≤144 ,Loose Tube )M5 :110(L) x 141(W) x 12(H) ±0.2nm( 144 <N≤256 ,Loose Tube )M1 :34(L) x24(W) x 11(H) ±0.2mm ( N≤8 ,Bare Fiber )M2 :60(L) x24(W) x 11(H) ±0.2mm ( N≤8 ,Loose Tube )M3 :90(L) x 55(W) x 12(H) ±0.2mm ( 8<N≤32 ,Loose Tube )M4 :100(L) x 100(W) x 12(H) ±0.2nm( 32 <N≤96 ,Loose Tube )M5 :110(L) x 141(W) x 12(H) ±0.2nm( 96 <N≤128 ,Loose Tube )

Примечания:

1. Все параметры измерены в условиях комнатной температуры.

2. Все параметры не включают потери на входе разъема; одна пара разъемов увеличивает потери на 0,3 дБ.

Схема внутренней конструкции модуля

Схема размеров модуля

Определение выводов

Pin numberPin definitionsSignal direction and typeFunction Description
M1/M2M3/M4/M5
51D0InputData bit D0 (least significant bit)
2D5InputData bit D5
23VCCPowerMains power supply,DC 5V ,1.0A
4D7InputData bit D7 (most significant bit)
5D6InputData bit D6
46GNDPowerGND
7D4InputData bit D4
68D1InputData bit D1
99TXDOutputSerial data transmitter (TTL-level serial port)
1010RXDInputSerial data receiver (TTL-level serial port)
711D2Inputdata bit D2
812D3Inputdata bit D3
1213/BUSYOutputLow level: ready to reset or receive data
14/ALARMOutputA high level indicates an operational error in the optical module
315/STROBEInputData bit on the falling edge
1416/RESETInputLow-level reset to channel 0
11GNDPowerGND
13MODELow-level data bit control switching; high-level UART control switching
1NCsuspended

Примечание: Для электрических разъемов модулей M3, M4 и M5 используется разъем MOLEX 87833-1620; в качестве разъема для клиентов рекомендуется использовать MOLEX 87568-1694.

Таблица логических переключений битов данных

/RESETD7D6D5D4D3D2D1D0Channel
0XXXXXXXX0
1000000001
000000012
000000103
000000114
11111111256

Информация о заказе FT-98-MEMS-1XN-A-B-C-D-E-F-G

ABCDEFG
ModeWavelengthDimension TypeFiber typeFiberdiameterFiber    LengthConnector
S:SMM:MM85: 850nm13: 1310nm14: 1490nm15: 1550nm162: 1625nm165: 1650nm13/15:1310/1550nm X:OtherM1 :34 x 24 x 11 M2 :60 x 24 x 11 M3 :90 x 55 x 12 M4 :100 x 100 x 12 M5 :110 x 141 x 12 X: Other5:50/1256:62.5/125 9: 9/125X: Other25:250um 90:900um X: Other05:0.5m 10:1.0m X:OtherOO:NoneFP: FC/PCFA: FC/APC SP: SC/PC    SA: SC/APC LP: LC/PCLA: LC/APC MP: MPOX: Other

Важное уведомление:

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they are applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or other. Further details are available from any F-tone Networks sales representative.

Power and Wavelength Testing

Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.

Traffic Testing

Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.

Optical Performance Testing

Test the transceivers’ eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.

End Face Testing

Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.

Прокрутить вверх