Характеристики продукта
● Низкие вносимые потери
● Широкий диапазон длин волн
● Низкий уровень перекрестных помех
● Высокая стабильность и надежность
● Модульная конструкция
Области применения
● Лабораторные исследования и разработки
● Мониторинг систем
● Конфигурация OADM
● Городские сети
● Многоканальный мониторинг оптических сигналов
● Оптическое волоконное зондирование
● Системы удаленного мониторинга оптических волокон
Технические характеристики.
| Model | FT-98-MEMS-M-16X16 |
| Operating wavelength | 1260-1650nm |
| Test wavelength | 1310/ 1550nm |
| Insertion loss | ≤2.5dB |
| Return loss | ≥45dB |
| Cross talk | ≥50dB |
| Polarization Dependent Loss | ＜0.3dB |
| Wavelength-dependent loss | ＜0.8dB |
| Temperature-related losses | ＜0.5dB |
| Switchover time | ≤50ms（16X16 种状态切换时间） |
| ≤15ms（相邻状态切换时间） | |
| Transmitted optical power | ≤23dBm |
| Fiber type | SM-9/ 125 |
| Optical interface types | FC/APC |
| Fiber length | 1.00 m |
| Control interface | RS232 |
| Operating voltage | DC5V |
| Power consumption | ≤10W |
| Operating temperature | -5℃ ~ +70℃ |
| Storage temperature | -40℃ ~ +85℃ |
| Module dimensions | 200x100x22mm |
Схематическое изображение внутреннего оптического тракта модуля
Схема конструкции
Описание выводов
| Pin# | Signal name | Type | Description | |
| 1 | 2 | VCC | Power | +5VDC , Digital power supply |
| 3 | 4 | GND | Power | Digital ground |
| 5 | TXD | Output | Transmit Data | |
| 6 | RXD | Input | Receive Data | |
| 7 | 8 | GND | Power | Digital ground |
| 9、10、11、12、13、14、15、16、17、18、19、 20 | NC | |||
Важное уведомление:
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they are applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or other. Further details are available from any F-tone Networks sales representative.
Power and Wavelength Testing
Test the signal delivering strength and wavelength, to ensure the signal decoding capacity of the receiver, and the wavelength remains consistent from the transmitter to the receiver.
Traffic Testing
Test the bit error rate and packet loss rate, to make them meet the corresponding standards and ensure the performance of transceivers.
Optical Performance Testing
Test the transceivers’ eye diagram situation, receiving sensitivity, extinction ratio, wavelength, light-emitting, light-receiving, current and voltage, to ensure the signal quality, stability and reliability of the transmission.
End Face Testing
Check the end face of the transceivers and keep them clean for more stable data transmission, better performance, and durability.
